The American Gym Springs on your mind?
You can rely on The American Gym!
 
    Search Store Contact Us
Home Preschool Gymnastics Gym Floors Mats and Pads Training Room Trampoline Related
Instructions Search Request a Quote! Checkout
Spring Floors
Floor Springs
Carpet Bonded Foam / Flexi-Rolls
Tumbl Traks
Gymnastics Equipment
Mats & Pads
Leasing Information




Lease to Own - Get Started Now!

 

 


 

 


 


Home » All Products

 Checkout
B - Econo Table Trainer

Details 

Our most affordable one-piece table trainer. This single section is 115 cm in height (45.28 inches). It is a good all-around size for most vaulters. Multi-density foam filler is covered in tough 18oz vinyl with handles securely attached for easy positioning and transportation. Available with Suede or Performance top.

VT-200  Econo Table Trainer with Suede Top $1,095
VT-200P  Econo Vault Table Trainer with Performance Top $1,095

Normally ships in 10 to 12 weeks. Must ship Motor Freight. Request a delivered cost.

Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

B - Fundamental Table Trainer

Details 

Our new fundamental vault table is the perfect size for beginners, measuring 35"L x 29"W x 20"H. It's portable size and fun colors make it irresistible to coaches and kids alike. Hook fastener flaps secure the table to the floor, keeping it in place. Solid vinyl cover over combination high density poly foam and crosslink filler. This Combo includes the 35" x 29" x 16" Booster Block for a combined 36" height. Hook and Loop fastener flaps secure the Table Trainer to Booster Block. Usually ships in 7-8 weeks.

Item # Description Price
VT-208 Fundamental Table Trainer Combo (both blocks) $569
VT-206 Top Block Only 50 cm (20") $349
VT-207 Bottom Block Only 40 cm ( 16") $235
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

B - Low Balance Beam - AAI

Details 

Non-Reflex Training Balance Beam
  • Similar to Competition Classic beam but without interchangeable reflex springs
  • Steel legs are powder coated in a blue metallic finish which resists chipping, fading and regular wear found in average finishes
  • Accommodates mats up to 20 cm
  • Beam Dimensions: 16'5" long x 4" wide x 15.75" (height at top of beam)
  • Normally ships in 3-4 weeks
406-090 Low Balance Beam -- Weight 254 lbs -- $1,300 + Motor Freight Request Freight Quote
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

B - Non-Cabled Single Bar Trainer - AAI

Details 

The Non-Cabled Single Bar Trainer allows you to set your height lower than our current system while saving space by not using cables as you would with other single bar trainers.

  • Height adjustments from 12” to 72” in 6” increments
  • Adjustment sleeves are 8″ tall with AAI’s spin and snap lock pins to provide quick and easy height adjustment
  • Width between uprights equals 94 1/2’’ (240cm) center-to-center
  • Consists of two bases, two uprights, and one men’s rail. Requires 16 'Red-head' anchors - not included.
  • Uprights are chrome plated while the sleeves and bases have a durable blue metallic powder-coat finish
  • 406-115 (with Regular Men's Rail)  $2,110 plus Motor Freight. Get a delivered price!
  • 406-116 (with 6' Men's Rail)  $1,930 plus Motor Freight. Get a delivered price!

These normally take about 3 to 4 weeks to ship. Please request a delivered price. Click on image or 'Details' for more detail. Made in USA.

Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

B - Padded Beam Table

Details 

Our new 8' long 7" wide beam training table is a versatile new way to train all levels of athlete in a safe way. At 7" wide with a 1.25" foam padding and vinyl cover this is a great beam for training a new flight series or that first walkover and cartwheel. This takes much of the fear out of learning new stunts on the beam. There is a hook under one end so you can clip the beam on to a stall bar and use it for strength and flexibility training also.
Price: $275.00
Add to cart

B - Quad Bars

Details 

This Adjustable Quad Bar System features four independent adjustable rails with a range of settings from 6" to 60". All welded steel construction with separate turn handle and pull-pin adjustment. Use with Powerflex or AAI rails. Requires 10 anchors (not included).
FYI: 17' 6" x 17' 6" overall space required for use with the 8' rails. 13' 6" x 13' 6" overall space is required for use with 6' rails.
No shipping is included in the pricing below:
Quad Bar Uprights (only)
QD-450 Quad Bar System without Rails, Uprights Only $1,450
Matting:
QD-516 12cm Quad Bar Mat System for 6' Rails $1,800
QD-512 12cm Quad Bar Mat System for 8' Rails $2,600
Rail Options:
CR-106 Powerflex Rail (6') each  $525
CR-108 Powerflex Rail (8') each $525

Please note which options you prefer and Request a Quote. We will be glad to furnish you a delivered price.

Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

B - Quick Release Single Bar Trainer - AAI

Details 

Quick release allows rapid change from men’s Single Bar Trainer to women’s.

• Height adjusts from 44” to 91 ½” (112 to 232cm) in 20cm increments and from 91 ½” to 99 1/4” (232 to 252cm) in 5cm increments
• Depending on the model selected, utilizes a standard Graphite X Women’s Uneven Bar or shot-peened stainless steel Men's Horizontal Bar. Pivot points of the bar are 94 ½” (240cm) center-to-center
.
• AAI features Copper Compression Sleeves on our apparatus cables, which improves apparatus performance
• Includes one Graphite X bar or Stainless Steel Bar, Safety Collars, Single Bar Trainer, Quick Release Conversion Kit, U-Base and Stabilizer Rods
• Requires four C-style floor anchors — not included.
• Compatible with old style plates only ½” (13mm)
407-450 Women’s Quick Release U-Base Single Bar Trainer $3,320 + Freight -- wt. 216 lbs. (98kg)
407-455 Men's Quick Release U-Base Single Bar Trainer $3,450 + Freight -- wt. 237 lbs. (108kg)
• Request a delivered price.
This bar is perfect to use over pits. Pit width under the bar should be 90".

Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

B - Recreational Adjustable Single Bar Trainer - SA

Details 

Training High Bar with short cable system and adjustable height!
This unit can be used with the Women's uneven bar rail (#GN3260) or Men's steel rail (#GN3110).
Rails sold separately. Supplied with all anchoring hardware, plus a pair of pivots for pit mounting. An additional low, flat connecting bar for floating floors is available (#5176-200).
The rail adjusts easily from the ground.  Minimum height: 95cm (37 2/5”), Maximum height: 275cm (108 1/4”) in 20cm (7 7/8”) then 10cm (2”) increments. Instant assembly, dismantling and tension adjustment via rapid tensioners. The rail from the Asymmetric Bar can be used. Supplied with low cross bar, which acts as a pivot (2 special pivots are supplied for pit mounting). With short cable system in 20cm (7 7/8") increments.
Normally ships in 2 to 3 weeks of your order.
$1,789 plus freight. Request Freight Quote
5176-010
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

B - Single Bar - Adjustable, Boltdown

Details 

V-Base Adjustable Training Bar has a uniquely small footprint so it fits easily into spaces other single bars cannot. 6" to 60" height adjustment is perfect for recreational and lower level gymnasts. Uniframe construction eliminates cables or poles. Uprights bolt securely to floorplates or concrete anchors (not included). Fabricated using the same materials and design specs as our Quad Bar System.

This system does not include a rail--only base unit consisting of zinc-plated steel upright with finished steel fittings for snaplock/turnpin combination fasteners. Great way to put your extra rail back to work!
Please note which options you prefer and Request a Quote. We will be glad to furnish you a delivered price.

***The 6' Powerflex Rails are on backorder until roughly November. Please keep this in mind if ordering.

Adjustable V-Base Bolt Down Single Bar Uprights (only)
SB-155 Quad Bar System without Rails, Uprights Only $675
Rail Options:
CR-106 Powerflex Rail (6') each $525
CR-108 Powerflex Rail (8') each $525
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

B - Table Trainers

Details 

Deluxe Table Trainer -- The first vault table trainer on the market is now the most versatile. Standard 2-section model provides 100cm working surface height (70cm curved top + 30cm block). Three optional blocks (10cm, 15cm & 25cm thick) enable height settings from 100cm to 50cm in 5cm increments. All sections connect securely using 4" hook/loop fastener. The Suede or Performance Top vault surface is removable.

VT-100  Deluxe Base 2-Section trainer - 100 cm (39.5") w/ Suede Top $1,095
VT-100P  Deluxe Base 2-section Trainer- w/ Performance Top  $1,095
VT-110  10 cm height block (4") $245
VT-125  25 cm height block (10") $375
VT-150  Deluxe Set, (VT-100, 110, 115 and 125) w/ Suede Top  $1,695
VT-150P  Deluxe Set, (VT-100, 110, 115 and 125) w/ Performance Top $1,695
These normally take about 6-7 weeks to ship. All these Vault Trainers must ship via motor freight. Please request a delivered price. Click on image or 'Details' for more detail. Made in USA.
Price: Click 'Request a Quote' at side or bottom of page to get a delivered price.
Add to cart

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »

 
Instructions Search Great Links Request a Quote! Checkout

© Property of The American Gym, a WinnMedia company, 2018 all rights reserved.