Login Status  
Not logged in
  » Login

I-Beam Clamp

I-Beam Clamp

Our Adjustable I-Beam Clamp is made of steel with 1/2-13 threaded rod for adjustment, secured and locked into position with serrated flange locknuts. The beam clamp is constructed of heavy gauge steel brackets with a 5/8" OD steel ring to easily connect climbing ropes or nets. 
This beam clamps fits beams that are 3 1/2" to 12" Wide. We will need to know the width of the bottom of your I-beam in order to provide the correct hardware. You can put this dimension in the Comments section as you check out or we will contact you after your purchase.
These beam clamps are specifically designed to mount to horizontal beams and withstand vertical loading. Clamps are not intended for angled/slopes beams or to be used with any equipment involving swinging. Please refer to the specific net and rope installation for the recommended number of clamps for each specific piece of Jammar equipment. Climbing ropes and nets must be hang from structurally adequate framework which will exceed any load placed on the equipment. Most beams and ceiling framework in institutional buildings will meet this criteria, however, always confirm this with your architect, building plans and / or structural engineer. TAG nor the manufacturer are not responsible for the structural adequacy of the building structure.
Please note, this beam clamp is not considered a permanent fixture and requires periodic inspection to ensure top performance.
P-088
Price: $155.00
  Product ID P-088
  Updated
3/17/2008
Quantity:
  •    Info
Our Adjustable I-Beam Clamp is made of steel with 1/2-13 threaded rod for adjustment, secured and locked into position with serrated flange locknuts. The beam clamp is constructed of heavy gauge steel brackets with a 5/8" OD steel ring to easily connect climbing ropes or nets. 
This beam clamps fits beams that are 3 1/2" to 12" Wide. We will need to know the width of the bottom of your I-beam in order to provide the correct hardware. You can put this dimension in the Comments section as you check out or we will contact you after your purchase.
These beam clamps are specifically designed to mount to horizontal beams and withstand vertical loading. Clamps are not intended for angled/slopes beams or to be used with any equipment involving swinging. Please refer to the specific net and rope installation for the recommended number of clamps for each specific piece of Jammar equipment. Climbing ropes and nets must be hang from structurally adequate framework which will exceed any load placed on the equipment. Most beams and ceiling framework in institutional buildings will meet this criteria, however, always confirm this with your architect, building plans and / or structural engineer. TAG nor the manufacturer are not responsible for the structural adequacy of the building structure.
Please note, this beam clamp is not considered a permanent fixture and requires periodic inspection to ensure top performance.
P-088

Our Products

Your Cart

0 Product(s) in cart
Total $0.00

Your Account

Login Status  Login Status
Not logged in

Recently Viewed...

Need Help?

Call 859-881-0018
8:30AM - 5:30PM (EST)
Instructions/FAQ
Track Your Order

Connect with Us